36kW Daxom electric boiler for central heating only
The UKDAX-36ETT is a 36kW three-phase electric boiler designed to heat water circulating through a compatible wet central-heating system. This is a heating-only model: it does not produce domestic hot water for taps, showers or baths. A separate appropriate hot-water system is required if domestic hot water is needed.
Technical specifications
- Manufacturer model: UKDAX-36ETT
- Rated heating capacity: 36kW
- Selectable heating capacity settings: P1 – 12kW (one-third output); P2 – 24kW (two-thirds output); P3 – 36kW (full output)
- Electrical supply according to Daxom EDM manual: 3~400V, 50Hz
- Dimensions (height × width × depth): 70 × 45 × 32 cm (700 × 450 × 320 mm)
- Weight listed in the manual: 33.2kg
- Expansion vessel: 12 litres
- Domestic hot-water flow rate: not applicable (heating only)
Before choosing or installing this boiler
Arrange a suitable heat-loss calculation and check the available electrical supply with a qualified electrician. Heating circuit design, system water quality, protection devices, wiring, isolation, mounting and commissioning must follow the current manufacturer instructions and applicable regulations. Boiler maximum capacity alone does not establish whether it is suitable for a building. The manual includes model-specific electrical information; do not use the simplified voltage and dimensions above as installation instructions.
See the Daxom EDM user and installation manual (PDF), the Daxom heat-loss calculator and contact Daxom UK to discuss availability and technical requirements.
Factory order – estimated 4-week lead time. These boilers are ordered from the factory. Please allow approximately 4 weeks from placing your order; the timing is an estimate, not a guaranteed delivery date. Contact Daxom to confirm the current dispatch and delivery estimate.
Image note: Photographs and dimension diagrams are taken from the corresponding Daxom EDM/EDT combi boiler listings for reference. The heating-only ETM/ETT model may differ in fittings or control details. Please use the model-specific specifications and installation manual when planning an installation.
36kW three-phase heating-only electric boiler: common questions
Does the UKDAX-36ETT supply domestic hot water?
No. The 36kW UKDAX-36ETT is for a compatible wet central-heating system only and does not heat domestic water for taps, showers or baths. A separately designed domestic hot-water solution is required where needed.
Who should specify a 36kW three-phase electric boiler?
A qualified heating professional and electrician should establish the design heat loss, available three-phase electrical capacity, circuit requirements, hydraulic design, controls and commissioning arrangements. The Find Your Boiler selector does not automatically recommend 36kW three-phase boilers. Contact Daxom UK for a professional discussion.
How is the 36kW ETT different from the 36kW EDT combi?
The ETT is a heating-only model. The 36kW / 48kW EDT commercial electric combi boiler is a different product designed for central heating and domestic hot water. Compare the model specifications before specifying equipment.
Explore the Daxom heating-only electric boiler range for other heating-only products.
P1, P2 and P3 heating output settings
The UKDAX-36ETT can be set to three maximum heating-capacity levels: P1 = 12kW, P2 = 24kW, or P3 = 36kW. These are three selectable maximum heating outputs in one boiler, allowing the chosen capacity to match the property’s calculated heating demand and available three-phase electrical capacity. A qualified professional must confirm three-phase supply capacity, other electrical loads, circuit design and the manufacturer’s requirements, following the Daxom installation and user manual and advice from qualified professionals. A lower capacity setting does not mean the mains supply or protective devices can automatically be undersized: the installer must verify the complete electrical requirements.







Reviews
There are no reviews yet.