What to Consider Before Buying an Electric Boiler in the UK

Last Updated on November 11, 2026 by daxom

Why consider a Daxom electric boiler?

Looking for a practical way to heat a property without a gas connection? Daxom electric boilers offer compact, modern heating for suitable homes, flats, holiday lets and other properties. There is no gas combustion or flue, and the range includes wall-hung and floor-standing options, instantaneous combi models and boilers with integrated hot-water storage. Choosing the right model starts with understanding your property and how you use heating and hot water. Daxom UK can help you explore the options before ordering.

1. Choose heating capacity that suits your home

The best starting point is a room-by-room heat-loss calculation, so your boiler is selected for the property’s actual heating needs rather than simply its number of bedrooms. Ask a heating professional to confirm the heat demand. Daxom 12kW boilers provide flexibility through selectable maximum central-heating output settings: P1 4kW, P2 8kW and P3 12kW. These settings limit maximum heating power and do not automatically reduce the total energy a property needs. Read the P1/P2/P3 guide.

2. Confirm the electrical supply before installation

Daxom UK can help explain the electrical requirements of each model. A 12kW single-phase boiler can draw around 55A at 230V, depending on its electrical specifications. A qualified electrician must assess the incoming supply, other loads, protective devices and cable sizing. Lower central-heating settings do not automatically mean a smaller supply is acceptable. The Compact combi can require full output for domestic hot water.

3. Choose the hot-water arrangement that suits your household

The 12kW Compact combi provides continuous hot water for one outlet at a time. Daxom also offers 50L, 80L and 120L cylinder options. Three-phase combi models do not have integrated cylinders. Heating-only models do not supply domestic hot water. Daxom UK can advise on suitable boiler models and hot-water performance. Your plumber should confirm shower flow, simultaneous demand and the suitability of the installed plumbing.

4. Understand running costs and how to manage them

Electric boiler running costs depend primarily on how much heat and hot water your property needs, the electricity tariff and the way the system is controlled. Good insulation, appropriate thermostat schedules and correct system sizing can help avoid unnecessary consumption. As a straightforward example, a boiler drawing 4kW continuously for one hour uses 4kWh; at an illustrative electricity price of 25p per kWh, that would cost £1. This is an example, not a prediction of your bill. Direct electric boilers are generally less energy-efficient than heat pumps, so it is worth comparing likely total costs for your particular property. Daxom can explain how the selectable heating settings work, but those settings do not guarantee lower energy consumption. Read the Daxom running-cost guide.

5. Plan a straightforward installation with the right trades

A competent plumber or heating installer must assess the wet heating system, radiators, controls, water quality and commissioning. A qualified electrician must design and check the electrical installation. Daxom UK can also provide product-specific technical guidance before installation. See the installation manuals.

6. Protect your investment with correct care and servicing

Scale protection may be appropriate in hard-water areas. Check the installation and annual servicing requirements. Daxom servicing covers England and Wales; Scotland and Northern Ireland have different support arrangements. Consult the current terms and conditions.

7. Consider the space, installation budget and delivery time

Confirm wall or floor space and service access. Budget for the boiler, plumbing, electrical work, controls and commissioning. Three-phase and heating-only boilers are factory-order products with an estimated four-week lead time from the date of order, not a guaranteed delivery date.

8. Find the Daxom model that fits your needs

For suitable single-phase installations consider the 12kW Compact combi or a cylinder model where stored hot water is preferable. Larger three-phase and heating-only models require specialist system design. View Daxom boilers and contact Daxom UK Ltd for advice on boiler selection, heating capacity and hot-water requirements before ordering. Daxom can help you narrow down the right product and answer product-specific questions. Your plumber and electrician should confirm the suitability of the property’s plumbing and electrical installation. Ready to explore your options? Contact Daxom UK or browse the range to find a suitable starting point.

Leave a Reply

Your email address will not be published. Required fields are marked *

Find Your Boiler